KONFIGURASI VOIP (CISCO PACKET TRACER)
KONFIGURASI VOIP (CISCO PACKET TRACER)
Langkah-Langkah :
1. Buka Cisco Packet Tracer.
2. Buat topologi seperti di atas :
- 1 Router
- 1 Switch
- 3 IP Phone
3. Masuk ke CLI pada switch :
- Switch>en
- Switch#conf t
- Switch(config)#int range fa0/1-24
- Switch(config-if-range)#switchport mode access
- Switch(config-if-range)#switchport voice vlan 1
- Switch(config-if-range)#ex
4. Tap router 2 kali, pilih cli dan ketikkan :
- router>en
- router#conf t
- router(config)#ip dhcp pool voice
- router(dhcp-config)#network 20.20.1.0 255.0.0.0
- router(dhcp-config)#default-router 20.20.1.1
- router(dhcp-config)#option 150 ip 20.20.1.1
- router(dhcp-config)#ex
- router(config)#ip dhcp excluded-address 20.20.1.1
- router(config)#int fa 0/0
- router(config-if)#ip add 20.20.1.1 255.0.0.0
- router(config-if)#no sh
- router(config-if)#ex
- router(config)#telephony-service
- router(config-telephony)#max-ephones 3
- router(config-telephony)#max-dn 3
- router(config-telephony)#ip source-address 20.20.1.1 port 2000
- router(config-telephony)#auto assign 4 to 6
- router(config-telephony)#auto assign 1 to 3
- router(config-telephony)#ephone-dn 1
- router(config-telephony)#number 081
- router(config-telephony)#ephone-dn 2
- router(config-telephony)#number 082
- router(config-telephony)#ephone-dn 3
- router(config-telephony)#number 083
5. Cek konektivitasnya dengan menggunakan ip phone
6. Jika sudah terkoneksi lalu coba hubungi ip phone 1 ke ip phone 2 ;
Komentar
Posting Komentar